FIBER LASER CUTTING MACHINE FLX SERIES

Fiber Laser Cutting Machine FLX Series | High-Precision Metal Cutting Solutions

Discover the high-precision Fiber Laser Cutting Machine FLX Series. Engineered for rapid, burr-free sheet metal fabrication, it maximizes yield while minimizing costs. Perfect for carbon steel, stainless steel, and alloys. Upgrade your industrial cutting productivity today!

Get Your Instant Quote

FiEETO-FLX Series: Maximum Cutting Efficiency

View All Machines

FIBER LASER CUTTING MACHINE FCS SERIES -1

FIBER LASER CUTTING MACHINE FCS SERIES -2

Technical Data

Model	FLX-3015
Max Worksheet Size	3050×1530mm
Laser Power	3/6/12/20Kw
Axis Stroke：X.Y.Z	3050mm1530mm250mm
Acceleration	1.2G
Maximum Speed	120m/min
Positioning Accuracy	±0.03mm
Shuttle Table Change Time	TEC24sec
Control Panel	27 inch screen
Dimension(L×W×H)	E8751×4530×2338mm
Power Supply	EE380V AC 50/60Hz

Machine Configuration

Robust Structure

The machine body is welded by over 8mm thickness high-strength steel and after 24 hours ,600 ℃ annealing process to fully release the welding stress inside the structure to enable you have a stable and non-deformation cutting table even after long term cutting.

Precision Milling

To ensure the highest cutting precision for our laser machines, we use an advanced 6-axis milling machine. Our three-phase milling process, which includes one rough and two fine milling steps, guarantees the best accuracy for the guide rail base.

Downdraft Ventilation

This machine uses a high-powered motor and a responsive exhaust system for the best smoke removal. The vents automatically open and close to follow the cutting area, concentrating suction where it’s needed most.

Safety Glasses

For staff safety, both the side panels and front door are equipped with protective glasses,they can observe cutting process outside of the machine, and the special glasses also can filter scattered laser beam.

Precision Milling

The exchange table boosts cutting efficiency by allowing you to load and unload materials during the cutting process. For example, the FLX3015 model can swap its material table in just 24 seconds, minimizing downtime.

Reliable Performance

Every machine undergoes a 2-day fatigue test and various cutting tests to ensure quality. The cutting parameters are saved on the computer for quick setup.

Cutting Software

Adaptive pierceing

Emit laser during the Z axis moving down, piercing efficiency has been improved 9%.

Fly cut

Flying cutting path can be generated for most graphics,reducing the pauses after cutting completion and further improving efficiency

Micro-joint

Optimized micro-joint points, the connection points are smaller, it is easier to separate parts, and the cutting surface is smoother.

Torque detection

When the system detects torque abnormal, it will stop moving immediately to protect from serious injury when a collision happens.

Anti-collision

Intelligently adjusting the lifting height of the cutting path based on the cutting sequenceof the parts to achieve obstacle avoidance during movements.

The Advantages of EtherCAT Control System

EtherCAT, the Industrial Ethernet technology invented by Beckhoff, makes machines and systems faster, simpler and more cost-effective.

Quick response and better accuracy

Synchronization accuracy better than 100 ns,which significantly improves efficiency and accuracy within system.

Easy connection

A bunch of cables replaced by a single network cable

Fast commissioning

Through software interface to write and modify servo motors’parameters greatly accelerate the commissioning process.

Closed-loop control

The system not only can send signals but also receive feedback from motion mechanism to achieve better accurate control.

Stability and reliability

Due to its Digital Serial Communication method, stronger anti-interference ability.

Accessories

Inovance servo motor Vibration suppression,anti-resonance compensation 20% Reduction of size and heat generated Harsh working environment adaptive Excellent compatibility Built-in safety function EtherCat support

Compact design while having high efficiency,high torque and low noise. IP65 dust and waterproof -10~90℃ harsh working condition Lifetime maintenance free

CSK linear guide High rigidity and high load With automatic centering ability Fully sealed dustproof system High positioning accuracy and good reproducibility Good walking smoothness High speed and low noise

KH rack and pinion Heavy-duty, high-precision, high-rigidity, high-speed, long-stroke precision running

Hanli water chiller Small size but powerful cooling capacity Power-saving Stable performance Strong compatibility Work under 45℃ ,95%humidity Low noise